PLEASE CONFIRM IF YOU HAVE THE NEW VERSION OR OLD VERSION OF THIS IMPELLER. IF YOU HAVE THE OLD VERSION YOU NEED TO BUY A WHOLE WETEND. ONLY THE NEW IMPELLER VERSION WILL SHIP
**THE OLD IMPELLOR IS THE GREY ONE PICTURED HERE**
Waterway Executive Impeller
Impellers for spa and hot tub pumps are specific to the make, model and horsepower of a particular spa pump, and are not interchangeable. Be sure to select the correct replacement spa impeller, and to also replace the shaft seal at the same time. Spa pump impellers also often mate with an impeller wear ring, which slips over the front eye of the impeller, to prevent wear and seal up the gap between the impeller and the pump housing.
Spa pump impellers don't often wear out over time, and unless they are visibly broken, are often not the cause of pumping problems. Impellers can however become clogged with seeds or small debris, which can be cleaned by reaming the vanes with a small screwdriver or length of stiff wire.
You may need a wear ring or metal cup seal with your impeller order.
310-4230 ¾ HP Executive Impeller (Yellow/Red)
310-4220 1.0 HP Executive Impeller (Red)
310-4210 2.0 HP Executive Impeller (White)
310-4200 3.0 HP Executive Impeller (Green)
310-4190 4.0 HP Executive Impeller (Blue)
310-4180 5.0 HP Executive Impeller (No Colour)
319-1380 Wear Ring 1.0, 2.0 & 3.0 HP
319-1370 Wear Ring 4.0 & 5.0 HP
PSR-1000 ⅝” Metal Cup Seal
PLEASE CONFIRM IF YOU HAVE THE NEW VERSION OR OLD VERSION OF THIS IMPELLER. IF YOU HAVE THE OLD VERSION YOU NEED TO BUY A WHOLE WETEND. ONLY THE NEW IMPELLER VERSION WILL SHIP